OUR Z-SERIES AND X-SERIES WASTEWATER EVAPORATORS AND CRYSTALLIZERS HAVE SUCCESSFULLY TREATED A WIDE RANGE OF WASTEWATER STREAMS. WE UNDERSTAND THE VARIOUS CHALLENGES THAT THESE WASTES PRESENT AND ARE UNIQUELY QUALIFIED TO OFFER PRODUCTS AND SERVICES FOR THESE APPLICATIONS.
METALS FINISHING rinses and drag-out
ZINC NICKEL PLATING
PRECIOUS METALS PLATING
Additionally, our equipment is specially designed to handle high Total Suspended Solids (TSS) loading, which is typical of the wastewater associated with plating operations. This means that excessive pH adjustment to precipitate or "drop out" metals is not necessary. The result is pure, distilled quality water, with less than 1 ppm metals content.
OIL AND GAS
SHALLOW-WELL PRODUCED WATER
SHALE GAS PRODUCED WATER
FRACTURING FLUID (FRAC) FLOWBACK
Because our equipment can handle high TSS, which is typical of the sand/water mixture of Frac Flowback and the typically high Total Dissolved Solids found in the heavy brine produced in oil and gas extraction, it is ideally suited for these applications.
ACID MINE drainaGE
Our equipment is built to handle a wide range of pH and water chemistries. We prescribed a Z-Series Wastewater Crystallizer to treat a large volume of Acid Mine Drainage in Southwestern Pennsylvania with exceptional success.
RAW (UNTREATED) LEACHATE
PRE-TREATED LEACHATE (POST METALS PRECIPITATION)
Our equipment is a proven platform for treating large volumes of completely untreated Leachate. Read the whitepaper HERE.